PC MACLAN for Windows 95:

PC MACLAN is software that installs on a Windows PC and allows peer-to-peer file 
and print sharing between Windows PCs and Macintosh computers. No additional software is needed on 
the Macintosh because PC MACLAN uses AppleTalk, the protocol that is built into every Macintosh. PC 
MACLAN is made up of four main components:

I. AppleShare File Client:
Windows 95 PCs can access Macintosh shared drives on the network through the  Network Neighborhood 
or Windows Explorer. Entire Macintosh drives or volumes can be mapped to network drives on the 
Windows PC. This feature makes working from a Macintosh drive as simple as working from your local 
hard drive.

II. AppleShare File Server:
Windows 95 PCs that can be accessed by Macintosh computers can share drives, files and file folders. 
Macintosh computers access PC files through the familiar Chooser interface. Users and groups are 
established and assigned Macintosh file sharing privileges. The file server can be used to accept .PS and 
.PRN files that can then be Auto-Spooled to any AppleTalk printer setup with PC MACLAN. This is the 
fastest way to get a print job out of your Mac so you can get back to work.

III. AppleTalk Print Client:
Windows 95 PCs can see and print to any AppleTalk print device on the network through the Network 
Neighborhood or Windows Explorer interface. Printers can be added through the Windows Printer 
Wizard. Windows 95 PCs must have the correct Windows printer driver installed. Most printer drivers are 
usually included with the Windows 95 install disks or CD or are available through the printer 
manufacturer. The Auto-Spool feature allows the user to setup seperate drop folders for each AppleTalk 
printer. These folders can be shared allowing any Mac to save .PS or .PRN files that will be sent directly 
out to the appropriate printer.

IV. AppleTalk Print Server:
Windows 95 PCs can act as a spooler for any available printer for the entire AppleTalk network. The 
Macintosh computer can access the shared printer through the Chooser if the correct Macintosh driver is 
installed. The driver should be available through the printer manufacturer. There is third party software 
that allows Macintosh computers to print to non-PostScript PC printers using a PostScript driver. Using a 
print server will generally release your Mac faster than printing directly to a network printer.

System Requirements:

PC 486 or higher, with 8Mb of RAM
Windows 95 Operating System
Network interface adapter (Ethernet, LocalTalk, TokenRing) 
Supports any network adapter that is NDIS 3.x or ODI compliant.

Limited technical support is available for the demo. Miramar's Technical Support 
number is (805) 965-5161.

Call Miramar at 1-800-862-2526 for a serial number to upgrade to the full 
version. The demo will have to be uninstalled to install the full version. 

Miramar Systems, Inc.
121 Gray Ave., Suite 200
Santa Barbara, CA 93101
Phone: (805) 966 2432
Fax: (805) 965 1824
sales@miramarsys.com
http://www.miramarsys.com